# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
# Append any additional kernel parameters:
append="quiet resume=/dev/slackvg/swap acpi_osi=Linux vt.default_utf8=0 \
        console=tty0 console=ttyS0,115200n8"
boot = /dev/sda
serial = 0,115200n8
lba32

compact        # faster, but won't work on all systems.

# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
  bitmap = /boot/slack.bmp
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
  bmp-colors = 255,0,255,0,255,0
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), "spill" (this is how many
# entries must be in the first column before the next begins to
# be used.  We don't specify it here, as there's just one column.
  bmp-table = 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
  bmp-timer = 65,27,0,255

# Standard menu.
# Or, you can comment out the bitmap menu above and 
# use a boot message with the standard menu:
#message = /boot/boot_message.txt

# Wait until the timeout to boot (if commented out, boot the
# first entry immediately):
prompt
# Timeout before the first entry boots.
# This is given in tenths of a second, so 600 for every minute:
timeout = 50
# Override dangerous defaults that rewrite the partition table:
change-rules
  reset
# VESA framebuffer console @ 1024x768x64k
vga = 791
# Normal VGA console
#vga = normal
# Ask for video mode at boot (time out to normal in 30s)
#vga = ask
# VESA framebuffer console @ 1024x768x64k
#vga=791
# VESA framebuffer console @ 1024x768x32k
#vga=790
# VESA framebuffer console @ 1024x768x256
#vga=773
# VESA framebuffer console @ 800x600x64k
#vga=788
# VESA framebuffer console @ 800x600x32k
#vga=787
# VESA framebuffer console @ 800x600x256
#vga=771
# VESA framebuffer console @ 640x480x64k
#vga=785
# VESA framebuffer console @ 640x480x32k
#vga=784
# VESA framebuffer console @ 640x480x256
#vga=769
# End LILO global section
# Linux bootable partition config begins

#default = Linux64_NVMe
default = LinuxLibre64_HD

#image = /boot/vmlinuz
#  initrd = /boot/initrd.gz
#  root = /dev/sda1
#  label = Linux64_HD
#  read-only

image = /boot/vmlinuz-gnu
  initrd = /boot/initrd-gnu.gz
  root = /dev/sda1
  label = LinuxLibre64_HD
  read-only

image = /boot/x86_64/vmlinuz
  append = "quiet resume=/dev/nvmvg/swap rootflags=discard acpi_osi=Linux vt.default_utf8=0"
  initrd = /boot/x86_64/initrd.gz
  root = /dev/nvmvg/root
  label = Linux64_NVMe
  read-only

image = /boot/x86_64/memtest86.bin
  label = memtest86
  read-only
# Linux bootable partition config ends